Plant Propagation Misting System » how to make a raised bed

Raised Beds For Plants-Advantages and Disadvantages

Terrin — Wed, 17 Mar 2010 03:36:12 +0000

There are many ways of structuring your garden. One way that is gaining popularity is raised beds.

A raised bed garden consists of erecting beds of soil on top of the ground. Like any gardening style, there are advantages and disadvantages of raised bed gardening. There are also a few options to consider when creating your raised bed.

The advantages of having raised beds are as follows:

Having raised beds allows you to blend your soil so that’s it is more tailored to growing plants with specific needs. With raised bed you will have less chance of soil erosion, pesky critters, leaf litter and other organic debris affecting your plants. Raised beds are ideal for long rooted plants due to the several inches of soil under them. In addition, raised beds will decrease the fatigue of your knees and back.

Unfortunately all of those advantages come with a price:

Constructing a raised bed garden can be costly and very time consuming. When getting your parts, remember that lumber treated with creosote should not be used. The creosote will seep into your beds and kill your plants. The edges of your beds must be constructed properly and reinforced to prevent the sides of the bed from deteriorating over time. Raised beds tend to dry out faster than regular tilled beds and will required a more vigorous watering routine.

Options for raised beds:

Raised beds can be edged with lumber as stated above or the edges can be left unfinished. Obviously the finished edged beds will require more work, time and money to construct. I usually construct raised beds with the unfinished edges. Leaving the edges unfinished makes the bed look more natural. One word of caution with an unfinished edged raised bed; be sure to properly edge the bed before actually making it, and keep the sod cut back so the grass does not start to grow into your raised bed.

Remember raised beds are a big investment. Start building your raised grow beds, and you could see better plants in no time and your back and knees will hurt less too.

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:how to make a raised bed,making a raised bed,plants,raised bed,raised beds,raised grow bed,raised growing bed,rooted cuttings

Limited time offer: Free “How to start a plant propagation nursery” E-book

Dwayne — Sat, 20 Feb 2010 16:51:30 +0000

The offer for the free E-book has expired. But no worries! You can still get the book by signing up for the newsletter. Just use the link under Free Reports and E-books to get it.

Yep, you read that right. For a limited time I am offering my E-book How to start a plant propagation nursery for absolutely free. No sign ups, no gimmicks, nothing! This is the exact E-book my subscribers are given when they sign up for my newsletter.

This E-book covers everything from where to get the knowledge you need, tips about which plants to propagate, how much space you will need, the types of rooting media used, an easy method to provide shade for your misting bed, and more!

Grab your copy right now before time runs out!

Download your How to start a plant propagation nursery by using the link to the right.

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:Easy plant propagation,free plants,gardening,home based business,how to make a raised bed,intermittent mist,intermittent mist system,intermittent mist systems,intermittent misting system,intermittent misting systems,Landscape Plants,making a raised bed,Mike McGroarty,mist system,mist systems,misting system,misting systems,plant propagation,plants,plants from cuttings,raised beds,raised grow bed,raised growing bed,rooted cuttings,rooting cuttings,rooting softwood cuttings

What You Need To Start A Plant Propagation Business Part 5

Dwayne — Sat, 19 Dec 2009 02:16:58 +0000

The fifth item needed to start a plant propagation business is the actual misting beds to root your cuttings in.

I touched on the rooting media you need for the misting beds in part 4 and will explain how to construct a misting bed and a few tips when building one that will greatly aid in rooting your cuttings.

Misting bed locations and dimensions

Misting beds are usually built on the ground. Flats can be set on benches to bring the cuttings up to a comfortable level, but one thing to keep in mind when constructing a raised misting bed is the fact that the rooting media will dry out quicker because there is more area exposed to wind.

A good size for a ground based misting bed is 4′ wide by whatever length you decide. Typical beds are 10′ long, but can be made 20′ long if desired. The only limiting factor is the number of misting nozzles that you will be able to use per zone. Look for my article on determining how many misting nozzles can be used per zone that is based on your water pressure and flow. The 4′ width is determined because you will have to get on your knees and bend over the edge of the bed to work with the cuttings. You can access half the beds width from one side and the other half by the opposite side. If using rooting flats, 2′ is the furthest you want to reach and lift a flat from.

Construct a box out of 2×6 lumber that is 4′ wide by whatever length you have decided on. Set this box on the ground in a flat area that drains well. Read this article on how to move water away from your misting bed if your soil drains poorly. Mark out the area around the box and remove all the grass by either spraying it with roundup to kill it or by cutting through the sod and removing it. NOTE: If you decide on the roundup, you MUST wait at least 3 days for the grass to die before you build your misting bed on it. For added insurance, place 3 layers of newspaper on top of the grass before you fill the bed with the rooting media. If choosing the cut and move method, place the sod upside down to help kill the grass. These pieces are great for starting raised beds!

Once the area is free of weeds and grass, place the box on the ground, install drainage if necessary, and fill it with sand or peat/perlite. Before actually using the rooting media, be sure to water your bed thoroughly to be sure it is moist and drains well.

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:Easy plant propagation,how to make a raised bed,intermittent mist,intermittent mist system,intermittent mist systems,intermittent misting system,intermittent misting systems,making a raised bed,mist system,mist systems,Misting System,misting system,misting systems,plant propagation,plants,plants from cuttings,rooted cuttings,rooting cuttings,rooting softwood cuttings

What You Need To Start A Plant Propagation Business Part 3

Dwayne — Sat, 05 Dec 2009 02:13:57 +0000

The third item needed to start a plant propagation business is space.

Surprisingly, you really don’t need much space to start your plant propagation nursery. I know what you are thinking; every nursery you have been to has been fairly sizable if not quite large. True, but to start your nursery you only need an area about 1/20th of an acre, or 2178 square feet. Now figure that the average home is somewhere near 2,330 square feet, and you can quickly see that you only need an area that is about the same size as an average house.

What is needed to start your plant propagation nursery

Surprisingly, there are few things needed to start your nursery.

Stock plants
Misting beds
Misting system
Grow beds
Compost heap
Sale area

That is a short list isn’t it? Of course as your nursery grows you will need to add a few more items, but that is essentially all you need to begin.

Stock Plants

I touched upon stock plants already but will mention that the best way to maintain your stock plants is to simply plant them in your landscape. Using them in your landscape benefits in two ways;

You beautify your landscape
They only need to be purchased once

Misting beds

Misting beds are simply beds made specifically to propagate softwood cuttings. The beds can be as small as 4′x8′, and you can begin with just one. To make things even better, sand can be used to root your cuttings in so you don’t need to buy peat, perlite, or flats for rooting. Four pieces of lumber can be used to form the side to hold the sand. Nothing fancy there.

Misting system

An intermittent misting system is installed in the misting bed to provide moisture to the cuttings as they form roots. Intermittent misting systems have traditionally been controlled by two mechanical timers. The newer digital misting timers are far superior and less expensive. Be sure to read the article Intermatic Timers-Why you should not use them for misting systems to learn about the benefits of digital misting timers.

Complete misting systems are now available at reasonable prices when starting your nursery, and these systems are expandable as your nursery grows.

Grow beds

Grow beds are simply beds you create to hold your newly rooted cuttings for them to grow. These beds are not essential if you are planning on selling the rooted cuttings, but if you plan on selling plants that have put on at least one years growth you will need to have them. Plants that have been rooted and grown for at least a year are called liners. These liners are what you would purchase at a local nursery.

Compost heap

Compost is one of those items that is essential to starting your propagation nursery. Compost is nothing more than decomposed vegetable matter that releases its nutrients into the soil, providing your rooted cuttings with essential nutrients. If you are thinking compost is difficult to do, go ahead and read this article at ezinearticles.com.

Sale area

Do you have a front lawn? How about a driveway? Well, you have a sale area! When you fill your sale area with great plants, folks will drive from miles away to buy your plants. Have a big box store nearby and are worried that you won’t get any business? When word gets out about how great your plants, knowledge and customer service is compared to theirs, you will draw them in droves. Skeptical? Go ahead and check out this site and see for yourself.

The next article will go into a little more detail on what you can use for rooting media.

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:Easy plant propagation,how to make a raised bed,intermittent mist,intermittent mist system,intermittent mist systems,intermittent misting system,intermittent misting systems,making a raised bed,mist system,mist systems,misting system,misting systems,plant propagation,plants,plants from cuttings,raised bed,raised beds,raised grow bed,raised growing bed,rooted cuttings,rooting cuttings,rooting softwood cuttings

Tips for Preparing a Planting Bed

Dwayne — Wed, 18 Nov 2009 05:11:53 +0000

You are welcome to use the free gardening article listed below on your website or in your newsletter as long as you reprint them as, including the contact information at the end. You must include an active link back to http://www.freeplants.com

If you are preparing beds for landscaping around your house this article should simplify the process for you. I say that because of everything that is written about this subject, some of it is accurate, some of it is just plain wrong, and much of it is much more complicated than it needs to be. I like to think of myself as simple Simon. I find the easiest, yet most effective way to do things, and they work.

Let’s assume that the area where you are planning your bed is now planted in grass. How do you get rid of the grass? Chemicals or no chemicals? Chemicals are easy, so we’ll look at the chemical method first.

My favorite chemical for killing grass and weeds is RoundUp, and used properly it is effective. Rule number one: Read the label on the package, and mix the chemical exactly as recommended by the manufacture. Rule number two: Assume that every plant that the RoundUp touches is going to die. It is a non-selective herbicide.

The first thing you need to do is mark out where your planting bed is going to be. Spend some time on this step. If you are landscaping around your house, give careful consideration to what is going to be planted in the bed, and then decide how large each plant is going to be when fully mature. You can keep plants trimmed to a certain size, but be realistic when you make these estimates. Trust me when I tell you, this is the number one mistake made by Do-it-yourself landscapers. People are just afraid to make those beds large enough.

Typically, a bed should never be narrower than 42”, and corner beds should be 12’ in diameter. Islands. If you make those little tiny island beds that I see everywhere I am going to come over to your house and snap you with a wet towel! The island bed in your front yard should be 20’ to 40’ long, and a minimum of 12’ in diameter on at least one end. The easiest way to mark out your planting beds is to buy a can of marking paint at the hardware store. Unlike most spray paint, this only works when the can is inverted, and it is designed specifically for painting lines on the ground. They even have cans that spray chalk instead of paint. I’ve always used the paint, it holds up better if it gets wet.

Once you have the outline of the bed established and marked, mix up some RoundUp and spray all the grass and weeds inside the bed area. Do not put RoundUp in a sprayer that you intend to use for other purposes. You need a sprayer that is dedicated for the use of herbicides. When applying the spray, be very careful not to let the spray drift onto the grass and other plants that you do not want to kill.

To minimize spray drift, adjust the spray nozzle so the spray pattern is narrow and the droplets are larger. A wide, fine spray pattern is sure to drift outside of the intended area. Also keep the pressure in the sprayer quite low. Pump it just enough to deliver the spray. High pressure causes the spray to atomize and drift. Apply just enough spray to wet the foliage. If you have liquid dripping off the blades of grass, you are applying too much. More is not better.

Once sprayed, be careful not to step in the area that has been sprayed. Many a people have had golden foot prints across their lawn because they forgot and walked through what had been sprayed.

This is the difficult part, and the part that many people do not get, so pay close attention. The only way that the RoundUp can possibly work, is if you leave it alone. Did you get that? Once you apply the RoundUp, don’t do another thing with that bed for 72 hours. That’s three very long days. I know you’re anxious, but this is the price you pay for not planning ahead.

RoundUp is a systemic herbicide, which means that it has to be absorbed by the plant, then trans located throughout the plant. It takes three days for that to happen. If you go digging and chopping, you might just as well skip the spraying step. Go build a compost bin while you’re waiting.

After three days the weeds and grass are going to look as healthy and happy as ever. Don’t let em fool ya. They’re as dead as dead can be. Providing the RoundUp didn’t get washed off by rain within the first 24 hours of the waiting period. Now you can dig and chop to your heart’s content.

However, the only digging that I do is to go around the edge of the bed and strip the sod back about 15”. Just peel off about 1” and flip it into the center of the bed. This makes it easier to edge and mulch the bed if you get the sod out of the way. Now for the non chemical method.

Mark out the outline of the bed as described above. Strip the sod back 15”, just like above. Since you aren’t using any herbicides I would dig down about 1-1/2” when removing the sod from the edges. Take the sod you stripped back and lay it in the center of the bed upside down and pack it down firmly. Now take newspaper or brown paper grocery bags and cover the entire bed area. Use 9 layers of newspaper. No matter what method you used, chemical or non chemical, you are now ready to fill the planting bed with topsoil.

Put 8 to 12” of good rich topsoil in the bed. Make sure the soil is higher in the back, closest to the wall, so the water drains away from the building. If you are creating an island planting make the center of the bed the highest point. Make sure the topsoil you buy is well drained and rich in organic matter. Buying topsoil is a tricky game, you’ve got to be careful and shop around. Topsoil is one item that you do not want to order over the phone, sight unseen.

This is what you are looking for when buying topsoil:

Topsoil that is rich in organic matter will be very dark in color. If the soil is light in color it is probably just fill sand. The other thing you’ve got to watch for is how well drained the soil is. Topsoil that has a clay base is poorly drained and sticky, and your plants will not be happy at all. They might even die if they are too wet. Once a clay based topsoil dries out it gets very hard.

Today most topsoil is run through a screener to remove the clumps, rocks, roots, and sticks. There is nothing wrong with buying unscreened topsoil, especially if you’ve visually inspected it, and have found it to be of good quality. Actually, really good topsoil shouldn’t have to be screened, but there is little of that quality topsoil to be had.

When you visit the yard where the soil is stock piled, scoop up a handful of the topsoil and run it through your fingers. If it seems to be grainy, it is probably good soil. But if it appears to tiny round balls, that can be smashed between your fingers, it is probably a clay based soil that will trap water during rainy seasons, and get as hard as a rock when it’s hot and dry.

Pay attention to how the soil is screened. Some machines just shake the soil over a set of screens to separate the debris, and others actually shred the soil. If the soil needs to be shredded, you don’t want it. Look closely at the pile that the raw soil is coming from. If the soil in the raw pile is as hard as a rock, that’s what the screened soil is going be once you get it in your beds. If it appears to be fairly loose, it’s probably good soil.

Put 6-8” of topsoil in your beds. You are now ready to plant. Did you notice that I didn’t get into rototilling and all kinds of extra work. Nor did I suggest that you add bone meal or any of those other goodies that the garden centers sell. I skipped the part about checking the Ph too. Ph is important, but I’ve found that good topsoil almost always has a suitable ph.

I’ve got a confession to make. In almost 30 years of growing, planting, landscaping and the like, I’ve never tested the ph of the soil on any project that I was working on. Is that smart? I don’t know, but I’ve been successful in my efforts, and I have landscaped several hundred homes and grown tens of thousands of plants.

It’s something to think about. What I’m really trying to say is don’t get caught up in too many details, and be careful who you take advice from at those garden stores. Many of those sales people were flipping burgers last week.

Michael J. McGroarty is the author of this article. Visit his most
interesting website, http://www.freeplants.com and sign up for his
excellent gardening newsletter, and grab a FREE copy of his
E-book, “Easy Plant Propagation”

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:Easy plant propagation,how to make a raised bed,making a raised bed,plant propagation,raised bed,raised beds,raised grow bed,raised growing bed

Mike McGroarty Is a Fraud

Dwayne — Sun, 25 Oct 2009 22:37:02 +0000

Yes, you read that right; Mike McGroarty and his backyard grower system is a fraud.

Not my words, but the words of others. Cruising message boards that deal with gardening and plant propagation, I often see folks who say something along those lines. Mike Mcgroarty is a fraud, Mike Mcgroarty is a scam artist, Mike Mcgroarty’s is a ripoff, and a few other things.

Well, I am here to personally let you know that I am extremely happy with Mike McGroarty and his products. I mean, really, who gives away as much information on plant propagation, working with landscape plants, and other topics? Go ahead and check out his website and see what he offers. Sign up for the free newsletter and get ready to learn a ton about gardening and plants in general. Then, scroll way down to the bottom of the page and click on the sitemap link and check out all the free information he gives away. Along with all those articles, he has many more on different websites, on article submission websites, and I have even seen them in a trade magazine I get. Does that look like something a fraud would do? No, I didn’t think so.

Go ahead and check out his website right now!

Have you discovered the members area yet? Visit THIS LINK to learn why you should.

Tags:change color of hydrangea,Easy plant propagation,free plants,gardening,grafting,home based business,how to make a raised bed,intermittent mist,intermittent mist system,intermittent mist systems,intermittent misting system,intermittent misting systems,making a raised bed,Mike McGroarty,mist system,mist systems,misting system,misting systems,plant propagation,plants,plants from cuttings,raised bed,raised beds,raised grow bed,raised growing bed,rooted cuttings,rooting cuttings,rooting softwood cuttings

Plant Propagation Misting System » how to make a raised bed

Raised Beds For Plants-Advantages and Disadvantages

Limited time offer: Free “How to start a plant propagation nursery” E-book

What You Need To Start A Plant Propagation Business Part 5

What You Need To Start A Plant Propagation Business Part 3

Archives

Tips for Preparing a Planting Bed

Mike McGroarty Is a Fraud